Clockgen Pll Setup Download

  1. Clockgen Pll Setup Download Windows
  2. Clockgen Pll Setup Download Free

Once in the BIOS, go to the exit tab and select Load Setup defaults. What this is doing is resetting all the BIOS settings, so you should be able to overclock. Exit BIOS saving changes. Open up clockgen, running it as administrator in Vista. Select your PLL, click ignore GSB/PCI, and select Read Clocks. Driver for Adafruit's Si5351 Clockgen Breakout. Contribute to adafruit/AdafruitSi5351Library development by creating an account on GitHub.

zodttd

New Member
[CONFIRMED WORKING] You can overclock the Sager NP5760 (Clevo M570U)
EDIT:
I was able to successfully try out cunningd46's method of overclocking the Clevo M570U based notebook. It's very simple. Just download ClockGen at http://www.cpuid.com/clockgen.php (currently v1.0.5.3) and:
1. Choose the PLL from the PLL SETUP menu and select ICS 950405
2. Checkmark the IGNORE PCI/AGP.
3. Click READ CLOCKS.
4. The 9th byte of the PLL OUTPUT is most likely set to 7E. Change it to 7F. Click UPDATE then APPLY.
5. Now you are able to overclock via PLL CONTROL by simply sliding the bar (fine tuned).
THANKS SO MUCH CUNNINGD46!
Also, for those who like to overclock, keep in mind you can set a high overclock and keep cool by only using it when needed by CPU load based throttling enabled with RMClock at www.rightmark.com. Be sure to turn off C/G states power maangement in the BIOS first.
Original posting:
Hi everyone,
I've been studying PLL's on the Clevo M570U. I determined the PLL is by ICS/IDT and follows the CK410M standard and seems to work with ICS 954204 bitsets.
So assuming its a ICS 954204 I've been able to change the frontside bus via Clockgen/SetFSB by editing the PLL registers directly.
Here's what you need to do to change the registers on the ics954204 via ClockGen:
1. Run clockgen and select ICS954119 within PLL Setup
2. Click Read Clocks
3. In IC Dump you should see the following bytes (or very similar):
3E FF F9 00 04 44 8B 11 3C 7E 15
CA 3C E6 3B 00 9D 61 08 D5 34
FSB Table:
0 0 0 266.67 100.00 33.33 14.318 48.00 96.00
0 0 1 133.33 100.00 33.33 14.318 48.00 96.00
0 1 0 200.00 100.00 33.33 14.318 48.00 96.00
0 1 1 166.67 100.00 33.33 14.318 48.00 96.00
1 0 0 333.33 100.00 33.33 14.318 48.00 96.00
1 0 1 100.00 100.00 33.33 14.318 48.00 96.00
1 1 0 400.00 100.00 33.33 14.318 48.00 96.00
1 1 1 200.00 100.00 33.33 14.318 48.00 96.00
To change the FSB according to ICS954204.pdf:
1. In ClockGen select the byte06 (8B) in the IC Dump.
2. Change the binary value to 10001xxx where xxx is the first three digits in the above FSB table.
Currently I can only change the FSB to:
133.33 (001)
166.67 (011)
100.00 (101)
This may be due to my RAM or other components. I'd like to know if someone can reach higher than the stock 166.67 FSB, especially at 11x multiplier!
Tips to help those who try this:
The byte06 (8B) bitset has test features built in to lower the FSB a bit which might help. To do this enable the following bits by setting them to 1: 111xxxxx
The byte01 (FF) can be change to FE to disable spread spectrum.
The spread spectrum is controlled by the byte09 (7E).
So in short I've been able to change the frontside bus but not higher than the normal 166.67 speed. For those who might be able to reach about 190MHz FSB, you're in luck for sure. I have a feeling the PCI/PCI-E/SATA isn't being locked and that's why I can't reach a higher FSB.
For those who are worried about trying this, there is a risk of turning your computer into a brick. My computer works fine and all I need to do when I set the PLL to a wrong state was reboot. I did my tests with C states turned off in the BIOS.
For the complete datasheet for the ICS 954204 goto: http://www.idt.com/products/files/2537897/ics954204.pdf
Hope this helps someone, and can help me reach a higher FSB for the love of overclocking.
Download2 ScreenshotsOur reviewNo Video

Set of overclocking software

The ClockGen series contains a bundle of overclocking programs, with multiple versions dedicated to one or several mainboards.
A Clockgen software dynamically overclocks (changes the system clock) a number of devices of your system: CPU, memory, AGP and PCI bus and provides overclock monitoring and improving functions.

Clockgen Pll Setup Download Windows


Instructions:
ClockGen does not require installation. Extract all the files in the same folder and run ClockGen.exe. ClockGen saves your settings in a file named clockgen.ini stored in the Windows folder for temporary files (usually: C:Documents and SettingsUserNameLocal SettingsTemp). To remove clockgen.ini from your system, run Clockgen with the following parameter: ClockGen.exe –u
ClockGen will show, in its main window, available functions on your system depending on your system specifications. “PLL Control” and “PLL Setup” buttons will appear when ClockGen detects a clock generator on your system.
To select the clock generator (PLL) first click on “PLL Setup”. Sometimes ClockGen will recognize the PLL model that your system is using (especially if your mainboard has an nVidia chipset integrated). In this case you won’t be able to select it yourself so you can skip to the “PLL Control” step.
  • License:
  • Platform:
  • Publisher:
  • File size:
  • Updated:
  • User Rating:
  • Editors' Review:
  • Downloads:
Portable Windows Repair 2021 (4.11.6)
Download
SIW (System Information for Windows) 2018 8.4.1120
WhoCrashed Home 6.50
AIDA64 Extreme 6.33.5700

Clockgen Pll Setup Download Free


Test your computer’s performance in various areas such as user experience, 3D rendering, RAM calculations and CPU processing speed
Tweaking.com - Hardware Identify 2.5.0
Pll
View detailed information regarding your computer’s installed hardware
HWiNFO32 7.06 Build 4500